CNC Double Column Machining Center

Home>Products>CNC Double Column Machine Center>CMNC Series

CNC Double Column Machining Centers

CMNC 3020-10055 Series

Image of CNC Double Column Machining Center - CMNC Series

Standard Functions & Accessories

CNC Square Type, 25 HP Spindle Motor (870 mm Treval)
FANUC OiMD Controller
Spindle & Gear Box Cooling System
X/Y/Z Axis with Line Ground Ball Screw
Automatic Lubrication System
Foot Switch for Spindle Unclamping
Telescopic Cover at the Front / Rear of Work Table
Dust Shield Cover for Column
Protection Cover for Cross Beam
Automatic Hydraulic Lock for Verticle Travel of Cross Beam
Operation / Maintenance Manual
Tool Box & Tool Kit
Coolant System
Air Conditioner for Electrical Cabinet
Leveling Bolts & Blocks
Manual Pulse Generator (For Series CMNC-6035~CMNC-10055)
Work Lamp (For Series CMNC-6035~CMNC-10055)
Pilot Lamp (For Series CMNC-6035~CMNC-10055)
RS232 Connection Port (For Series CMNC-6035~CMNC-10055)
Coolant Gun and Water Gun (For Series CMNC-6035~CMNC-10055)

Optional Functions & Accessories

FANUC 31i Controller
10 HP Side Milling Head (NC Control)
Manual 90° Right Angle Milling Head
Manual Universal Milling Head
Semi-Auto Bevel Gear Driven Milling Head
Semi Chip Enclosure, Chip Auger, Chip Cart
300 mm Raiser Block
500 mm Raiser Block
Linear Scale
Full Chip Enclosure with Top Roof
Sliding Door
Rigid Tapping
Oil Skimmer
Preparation for Oil Hole Holder
Coolant through Spindle
Semi-Automatic Head Attachment with 5° Index Increment
Pendant Type Control Panel
Automatic Tool Length Measurement

Specifications

MODEL		UNIT	CMNC-3020	CMNC-4020	CMNC-5020
Travel
X Axis Travel		mm	3000	4000	5000
Y Axis Travel		mm	2000
Z Axis Travel		mm	870
W Axis Travel		mm	1300
Distance from Spindle Nose to Table (H)		mm	1500
Between Column		mm	2050
Table
Table Area		mm	3000 * 1500	4000 * 1500	5000 * 1500
T-Slot (W x Pitch)		mm	22
Max. Table Load		kgs	10000	12000	14000
Spindle
Spindle Motor (cont. / 30 mins)		KW / HP	18.5 / 22; 25 / 30 (opt)
Spindle Speed (gear drive)		rpm	3000
Spindle Nose Taper			BT-50
Feed
X, Y-axis Rapid Traverse		mm/min	10000 / 10000		8000
Z-axis Rapid Traverse		mm/min	8000
Cutting Feed Rate		mm/min	5~5000
Cooling / Lubrication System
Hydraulic Oil Tank Capacity		L	200
Lubrication Oil Tank Capacity		L	20
Miscellaneous
CNC Control			MITSUBISHI / FANUC
Air Pressure		kg/cm²	6
Power Required		KVA	55
Machine Weight		kgs	27500	30000	35000
Space Occupied	LxWxH	mm	9980x5300x5800	11300x5300x5800	13300x5300x5800

* We reserve the right to change design, color or specification without notice.

- Top -

MODEL		UNIT	CMNC-4025	CMNC-5025	CMNC-6025
Travel
X Axis Travel		mm	4000	5000	6000
Y Axis Travel		mm	2500
Z Axis Travel		mm	870 (std) / 1200 (opt) : 800KMC (opt)
W Axis Travel		mm	1300
Distance from Spindle Nose to Table (H)		mm	1700 (std) / 2000~3000 (opt)
Between Column		mm	2550
Table
Table Area		mm	4000 * 2000	5000 * 2000	6000 * 2000
T-Slot (W x Pitch)		mm	22
Max. Table Load		kgs	13000	16000	20000
Spindle
Spindle Motor (cont. / 30 mins)		KW / HP	18.5 / 22; 25 / 30 (opt)
Spindle Speed (gear drive)		rpm	3000
Spindle Nose Taper			BT-50
Feed
X, Y-axis Rapid Traverse		mm/min	10000 / 10000		8000
Z-axis Rapid Traverse		mm/min	8000
Cutting Feed Rate		mm/min	5~5000
Cooling / Lubrication System
Hydraulic Oil Tank Capacity		L	200
Lubrication Oil Tank Capacity		L	20
Miscellaneous
CNC Control			MITSUBISHI / FANUC
Air Pressure		kg/cm²	6
Power Required		KVA	60		65
Machine Weight		kgs	48000	55000	59000
Space Occupied	LxW	mm	12000x5900	13300x5900	15800x5900
	H	mm	6000(std)

* We reserve the right to change design, color or specification without notice.

- Top -

MODEL		UNIT	CMNC-5030	CMNC-6030	CMNC-8030	CMNC-10030
Travel
X Axis Travel		mm	5000	6000	8000	10000
Y Axis Travel		mm	3000
Z Axis Travel		mm	870 (std) / 1200 (opt):800 KMC (opt)
W Axis Travel		mm	1300
Distance from Spindle Nose to Table (H)		mm	1700 (std) / 2000~4000 (opt)
Between Column		mm	3050
Table
Table Area		mm	5000 * 2500	6000 * 2500	8000 * 2500	10000 * 2500
T-Slot (W x Pitch)		mm	22
Max. Table Load		kgs	18000	22000	32000	38000
Spindle
Spindle Motor (cont. / 30 mins)		KW / HP	18.5 / 22; 25 / 30 (opt)
Spindle Speed (gear drive)		rpm	3000
Spindle Nose Taper			BT-50
Feed
X, Y-axis Rapid Traverse		mm/min	8000 / 8000
Z-axis Rapid Traverse		mm/min	Z:8000
Cutting Feed Rate		mm/min	5~5000
Cooling / Lubrication System
Hydraulic Oil Tank Capacity		L	200
Lubrication Oil Tank Capacity		L	20
Miscellaneous
CNC Control			MITSUBISHI / FANUC
Air Pressure		kg/cm²	6
Power Required		KVA	75		100
Machine Weight		kgs	58000	66000	85000	102000
Space Occupied	LxW	mm	13300x6400	15800x6400	20500x6400	25500x6400
	H	mm	6000(std)

* We reserve the right to change design, color or specification without notice.

- Top -

MODEL		UNIT	CMNC-6035	CMNC-8035	CMNC-10035
Travel
X Axis Travel		mm	6000	8000	10000
Y Axis Travel		mm	3500
Z Axis Travel		mm	870 (std) / 1200 (opt) : 800KMC (opt)
W Axis Travel		mm	1600
Distance from Spindle Nose to Table (H)		mm	1700 (std) / 2000~4000 (opt)
Between Column		mm	3550
Table
Table Area		mm	6000 * 3000	8000 * 3000	10000 * 3000
T-Slot (W x Pitch)		mm	22 / 28
Max. Table Load		kgs	23000	35000	40000
Spindle
Spindle Motor (cont. / 30 mins)		KW / HP	18.5 / 22; 25 / 30 (opt)
Spindle Speed (gear drive)		rpm	3000
Spindle Nose Taper			BT-50
Feed
X, Y-axis Rapid Traverse		mm/min	8000x8000	6000x8000	6000x8000
Z-axis Rapid Traverse		mm/min	8000
Cutting Feed Rate		mm/min	5~5000
Cooling / Lubrication System
Hydraulic Oil Tank Capacity		L	200
Lubrication Oil Tank Capacity		L	20
Miscellaneous
CNC Control			MITSUBISHI / FANUC
Air Pressure		kg/cm²	6
Power Required		KVA	80	100
Machine Weight		kgs	76000	93000	115000
Space Occupied	LxW	mm	158000x6900	20500x6900
	H	mm	6350(std) / 5800, 7300(opt)

* We reserve the right to change design, color or specification without notice.

- Top -

MODEL		UNIT	CMNC-6042	CMNC-8042	CMNC-10042
Travel
X Axis Travel		mm	6000	8000	10000
Y Axis Travel		mm	4200
Z Axis Travel		mm	870 (std) / 1200 (opt) : 800KMC (opt)
W Axis Travel		mm	1600
Distance from Spindle Nose to Table (H)		mm	1700 (std) / 2000~4000 (opt)
Between Column		mm	4250
Table
Table Area		mm	6000 * 3200	8000 * 3200	10000 * 3200
T-Slot (W x Pitch)		mm	22 / 28
Max. Table Load		kgs	25000	35000	40000
Spindle
Spindle Motor (cont. / 30 mins)		KW / HP	18.5 / 22; 25 / 30 (opt)
Spindle Speed (gear drive)		rpm	3000
Spindle Nose Taper			BT-50
Feed
X, Y-axis Rapid Traverse		mm/min	8000x8000	6000x8000	6000x8000
Z-axis Rapid Traverse		mm/min	8000
Cutting Feed Rate		mm/min	5~5000
Cooling / Lubrication System
Hydraulic Oil Tank Capacity		L	200
Lubrication Oil Tank Capacity		L	20
Miscellaneous
CNC Control			MITSUBISHI / FANUC
Air Pressure		kg/cm²	6
Power Required		KVA	90	100
Machine Weight		kgs	85000	110000	132000
Space Occupied	LxW	mm	158000x7600	20500x7600	20550x7600
	H	mm	6350(std) / 6800, 7300(opt)

* We reserve the right to change design, color or specification without notice.

- Top -

MODEL		UNIT	CMNC-6050	CMNC-8050	CMNC-10050
Travel
X Axis Travel		mm	6000	8000	10000
Y Axis Travel		mm	5000
Z Axis Travel		mm	870 (std) / 1200 (opt) : 800KMC (opt)
W Axis Travel		mm	1600
Distance from Spindle Nose to Table (H)		mm	1700 (std) / 2000-4000 (opt)
Between Column		mm	5050
Table
Table Area		mm	6000 * 4000	8000 * 4000	10000 * 4000
T-Slot (W x Pitch)		mm	22 / 28
Max. Table Load		kgs	28000	35000	40000
Spindle
Spindle Motor (cont. / 30 mins)		KW / HP	18.5 / 22; (25 / 30) (opt)
Spindle Speed (gear drive)		rpm	3000 (Gear Type)
Spindle Nose Taper			BT-50
Feed
X, Y-axis Rapid Traverse		mm/min	8000x8000	6000x8000	6000x8000
Z-axis Rapid Traverse		mm/min	6000
Cutting Feed Rate		mm/min	5~5000
Cooling / Lubrication System
Hydraulic Oil Tank Capacity		L	200
Lubrication Oil Tank Capacity		L	20
Miscellaneous
CNC Control			MITSUBISHI / FANUC
Air Pressure		kg/cm²	6
Power Required		KVA	100
Machine Weight		kgs	105000	116000	138000
Space Occupied	LxW	mm	158000x8300	20500x8300	25500x8300
	H	mm	6350(std) / 6800, 7300, 7900, 8600(opt)

* We reserve the right to change design, color or specification without notice.

- Top -

MODEL		UNIT	CMNC-8055	CMNC-10055
Travel
X Axis Travel		mm	8000	10000
Y Axis Travel		mm	5500
Z Axis Travel		mm	870 (std) / 1200 (opt) : 800KMC (opt)
W Axis Travel		mm	1600
Distance from Spindle Nose to Table (H)		mm	1700 (std) / 2000-4000 (opt)
Between Column		mm	5550
Table
Table Area		mm	8000 * 4000	10000 * 4000
T-Slot (W x Pitch)		mm	22 / 28
Max. Table Load		kgs	42000	42000
Spindle
Spindle Motor (cont. / 30 mins)		KW / HP	18.5 / 22; (25 / 30) (opt)
Spindle Speed (gear drive)		rpm	3000 (Gear Type)
Spindle Nose Taper			BT-50
Feed
X, Y-axis Rapid Traverse		mm/min	6000x6000	6000x6000
Z-axis Rapid Traverse		mm/min	6000
Cutting Feed Rate		mm/min	5~5000
Cooling / Lubrication System
Hydraulic Oil Tank Capacity		L	200
Lubrication Oil Tank Capacity		L	20
Miscellaneous
CNC Control			MITSUBISHI / FANUC
Air Pressure		kg/cm²	6
Power Required		KVA	100
Machine Weight		kgs	128000	148000
Space Occupied	LxW	mm	20500x8900	25500x8900
	H	mm	6350(std) / 6800, 7300, 7900, 8600(opt)

* We reserve the right to change design, color or specification without notice.

- Top -

Relative Products :